- 01
Coating Matting Efficiency: A Formulator's Troubleshooting Guide
Diagnosing the top 4 factors that kill silica matting efficiency.
Read - 02
Hydrogen Silicone Fluid Selection Guide
Conclusions First: MESIL® Hydrogen Silicone Oils are high-purity reactive fluids engineered for precision cross-linking and surface modification. By calibrating the Silicon-Hydrogen (Si-H) bond density from 0.18% to 1.58
Read - 03
Hydrogen Terminated Silicone Oil Selection Guide
Utilize the following deterministic matching logic to identify the correct THF grade for your application.
Read - 04
MESIL OH Polymer Selection Guide
Bottom Line Up Front: Selecting the correct MESIL® 107 Series grade requires balancing Kinematic Viscosity (750 to 550,000 mm²/s) with specific curing speed and mechanical strength requirements. This technical guide esta
Read - 05
Selection Guide: MESIL® BS Water-Based Emulsions
Bottom Line Up Front: MESIL® Water-Based Silicone Emulsions are non-ionic, solvent-free active polydimethylsiloxane (PDMS) dispersions featuring ~50% non-volatile content. Stop guessing your formulations. Read the logic
Read - 06
Textile Silicone Emulsion & Amino Oil Selection Guide
Bottom Line Up Front (BLUF): Selecting the optimal MESIL® textile auxiliary is a strict function of evaluating substrate material, desired hand feel, and process compatibility (Padding vs. Exhaust). This guide decodes ou
Read - 07
Textile Silicone Emulsion Selection Guide
Bottom Line Up Front (BLUF): Selecting the right textile silicone emulsion is a strict function of three variables: Substrate Material, Active Solid Content (30% to 63%), and Application Process. This guide removes the g
Read - 08
Vinyl Silicone Fluid Selection Guide
Bottom Line Up Front (BLUF): Selecting the exact Vinyl Silicone Fluid (CAS 68083-19-2) is a mathematical balance between viscosity and crosslink density. As viscosity increases (from 20 to 20,000 cSt), the terminal vinyl
Read
추측을 멈추세요. 처음부터 올바른 등급을 선택하세요.
이 라이브러리의 각 가이드는 의사결정 프레임워크를 제공합니다 — 점도 범위, 가교 밀도 목표, 기재 호환성, 공정 제약 — 테스트가 시작되기 전에 올바른 SEMITECH 등급을 선정할 수 있도록 합니다.
다루는 내용
- 수소 실리콘 유체 — Si-H 함량 0.18%–1.58%, 반응성 가교 응용
- 수소 말단 실리콘 오일 — 사슬 말단 Si-H 밀도에 의한 THF 등급 매칭
- 비닐 실리콘 유체 — 점도 20–20,000 cSt, HTV/LSR용 말단 비닐 함량
- MESIL 107 OH 폴리머 — 동점도 750–550,000 mm²/s, 경화 속도 대 강도
- 섬유용 아미노 실리콘 에멀전 — 기재 × 촉감 × 패딩 대 배진 공정
- 수계 PDMS 에멀전 (MESIL BS) — 활성 고형분 ~50%, 비이온성, 용매 불포함
- 코팅 무광 제제 — 광택 목표, PVC 및 DFT에 따른 GMATT 및 HMMAT 등급 선택
이 가이드 사용 방법
각 가이드는 의사결정 매트릭스로 구성되어 있습니다: 공정 제약 조건 (점도, 활성 함량, 기재)에서 시작하면 가이드가 해당 등급으로 안내합니다. 대안이 있는 경우 절충점을 명확하게 설명합니다.
이 제품들의 기술적 기초에 대해서는 Technical Intelligence를 참조하세요. 제품 사양 및 샘플 요청은 Products로 이동하세요.
Silicone & Specialty Chemical Grade Selection Guides | SEMITECH — grade recommendation & samples.
Submit formulation targets (gloss, system, DFT, volume). A SEMITECH chemist will recommend the right grade and ship a lab sample.